ZENEC ZE-NC3810 User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 6
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
3
2
1
Das TMC-Modul (No.6) wird an das
ZE-NC3810 mit Mini-USB und
dem weißen Fakra-Stecker ange-
schlossen. Zum Schluss wird das
Antennenkabel des Fahrzeuges an den
Antennenanschluß des TMC-Moduls
angeschlossen.
Verbinden Sie nun den entsprechenden
Stecker des Hauptanschlusskabels mit
dem CAN-Bus Adapter (No.16).
Das Hauptanschlusskabel (No.3)
wird, wie im Anschlussdiagramm
aufgelistet, angeschlossen. Dabei
sollten Sie darauf achten, dass der im
Hauptanschlusskabel integrierte braune
8-polige Stecker entsprechend mit dem
ZE-NC3810 verbunden wird.
1
2
3
Connect the TMC module (No.6)
via Mini-USB and the white Fakra
connector to the ZE-NC3810.
Finally connect the antenna connector
of the car to the antenna adapter of the
TMC module.
Now connect the appropriate connector
of the main connection cable with the
CAN bus interface (No.16).
Connect the main connection cable as
described in the electrical connections
overview.
Take care to connect the brown 8-pin
connector, which is integrated in the
main connection cable (No.3), to the
ZE-NC3810.
Uhrzeiteinstellung
Bevor Sie das Originalradio ausbauen, stellen Sie im Menü für die Uhrzeiteinstellung von „Automatisch“ auf „Manuell“ um. Ohne
diese Umstellung lässt sich die Uhrzeit des Bordcomputers nicht mehr einstellen, da dieser auf die „automatisch“ gelieferte Uhrzeit
des Werksradios angewiesen ist. Das ZE-NC3810 bietet dies nicht. Je nach Fahrzeugkonfiguration ist eine spätere Umstellung von
„Automatisch“ auf „Manuell“ nicht möglich.
Es muss dann später nur zum Zweck der Zeiteinstellung das Werksradio erneut angeschlossen werden.
Time settings
Make sure the original radio is set to „automatic“ instead of „manual“ in the time settings menu. If it is still set to „automatic“ you will
not be able to set the time of the boardcomputer anymore, as it is relying on the transmission of time data through the original radio.
The ZE-NC3810 does not support that function. Depending on vehicle configuration it might not be possible to change from
„automatic“ to „manual“ after radio swapping.
You will most likely be forced to reinstall the original radio for the sole purpose of setting the time if you omit this step.
Page view 1
1 2 3 4 5 6

Comments to this Manuals

No comments